Oktober 2013

Archive for Oktober 2013

UMBREON

Senin, 14 Oktober 2013

Posted by K

Add Comments

UMBREON

197 / UMBREON - Pokémon Papercraft
Name:Umbreon
Type: Dark
Species: Moonlight Pokémon
Height: 1.0 m (3' 3")
Weight: 27.0 kg (59.5 lbs)
Interesting Facts: When agitated, this Pokémon protects itself by spraying poisonous sweat from its pores. Also, on the night of a full moon, or when it gets excited, the ring patterns on its body glow yellow. It evolves from Eevee by Happiness during the night or when around a Moon Shard.

THE PAPER MODEL
Height: 30.0 cm/11.8 in
Width: 14.3 cm/5.6 in
Depth: 23.4 cm/9.2 in
No. of Pages: 8
No. of Pieces: 76
Level: Medium
NOTES: Start with the head and work down. Ensure you do fold the creases around the groin area. Close body at one of the rear feet.

Download: A4 / Letter

TYRANITAR

Posted by K

Add Comments

TYRANITAR

248 / TYRANITAR - Pokémon Papercraft
Name: Tyranitar
Type: Rock / Dark
Species: Armor Pokémon
Height: 6′07″ (2.0m)
Weight: 445.3 lbs. (202.0kg)
Interesting Facts: Tyranitar are insolent and selfishly uncaring towards others. They are extremely strong, and their thick, rocky hides give them a good resistance. Because of this, they are always looking forward for a battle, and will not flinch at anything. If enraged, Tyranitar sets off outstanding earthquakes that can completely change the entire landscape, often representing a major headache for cartographers causing them to redraw maps.

THE PAPER MODEL
Height: 20.1 cm/7.9 in
Width: 17.4 cm/6.9 in
Depth: 32.1 cm/12.6 in
No. of Pages: 11
Level: Medium

NOTES: As long as you take your time, this will be a moderately easy, however time-consuming, model. Be sure to attach the spikes to the body as soon as built. For the final page, the blue diamond-shaped piece isn't necessary, as the place where it attaches is hidden when the two pieces (top and bottom) are combined.

Download: A4 / Letter

HOUNDOUR

Posted by K

Add Comments

HOUNDOUR

228 / HOUNDOUR - Pokémon Papercraft
Name: Houndour
Type: Dark / Fire
Species: Dark Pokémon
Height: 0.6 m (2′00″)
Weight: 10.8 kg (23.8 lbs.)
Interesting Facts: Houndour is a dog-like Pokémon with short, black fur. It has a red underbelly and snout. Houndour appears to have a skull on its forehead and ribs on its back. Houndour might be distantly related to Growlithe since both of them are canine Pokémon that are Fire-type, are in the same egg group, and grow at the same rate. It evolves into Houndoom starting at level 24.

THE PAPER MODEL
Height: 20.0 cm/7.9 in
Width: 8.2 cm/ 3.3 in
Depth: 20.0 cm/7.9 in
No. of Pages: 6
Level: Medium

NOTES: The one was testbuild by Haywan who even made a video of it. Just watch it, it might help you to build yours.

Download: A4 / Letter

ABSOL

Posted by K

Add Comments

ABSOL

359 / ABSOL - Pokémon Papercraft
Name: Absol
Type: Dark
Species: Disaster Pokémon
Height: 1.2 m (3′11″)
Weight: 47 kg (103.6 lbs.)
Interesting Facts: Absol is a quadrupedal mammal-like Pokémon. Its dark blue to gray body is covered in white fur, with a ruff around its neck and chest, and a tuft on the top of its head adorned with a single blue-black oval. It has a cat-like face, a scythe-like tail and a sickle-shaped growth on the side of its head. Its broad, circular feet are equipped with three claws each, and spikes protrude from the heels of its hind legs and the elbows of its anterior legs. Absol is able to predict when a natural disaster will occur, and tries to warn people when one is approaching. This often has the unfortunate effect of Absol itself being blamed for the disaster.

THE PAPER MODEL
Height: 21.8 cm/8.6 in
Width: 12.1 cm/ 4.8 in
Depth: 24.8 cm/9.8 in
No. of Pages: 6
No. of Pieces: 65
Level: Medium/Hard

NOTES: Building Suggestions added into the download pack. The only thing making the difficult as hard are the claws, which actually aren't that hard, just very tedious. Also be sure to trim the 'mane'. The contrasting (lighter) white around the fur that attaches to the head should be shaped and trimmed.

Download: A4 / Letter

CRAWDAUNT

Posted by K

Add Comments

CRAWDAUNT

342 / CRAWDAUNT - Pokémon Papercraft
Name: Crawdaunt
Type: Water / Dark
Species: Rogue Pokémon
Height: 1.09 m (3′07″)
Weight: 159.2 kg (72.3 lbs.)
Interesting Facts: Crawdaunt are extremely aggressive Pokémon that will bully others enough to drive them away from their homes, exhibiting behavior similar to Whiscash.Its nature also means that Crawdaunt is prone to challenge other living things to battle, and it loves to do so. Crawdaunt molts its shell regularly, and immidiately after its shell is soft and tender. Until the shell hardens, Crawdaunt hides in its streambed burrow to avoid attack from its foes. It evolves from Corphish starting at level 30.

THE PAPER MODEL
Height: 25 cm/9.8 in
Width: 22.2 cm/ 8.7 in
Depth: 30.4 cm/12 in
No. of Pages: 6
No. of Pieces: 54
Level: Medium

NOTES: Just build the top and bottom separately, closing each piece at the middle. After both are built, end by connecting them. Attach the star to the forehead whenever possible. Build the legs before completing the bottom section of the body, and put them into the space before attaching the ring labeled B3.

Download: A4 / Letter

SHARPEDO

Posted by K

Add Comments

SHARPEDO

319 / SHARPEDO - Pokémon Papercraft
Name: Sharpedo
Type: Water / Dark
Species: Brutal Pokémon
Height: 1.8 m (5′11″)
Weight: 89.2 kg (195.8 lbs.)
Interesting Facts: Sharpedo is a generally dreaded and distrusted Pokémon. Sharpedo moves through the sea by swimming at speeds of up to 120 km/h (75 mph) by forcing water out of its rear. Its teeth are strong enough to bite through metal, and they grow back rapidly if they snap off. Sharpedo is driven by an unruly, caustic urge to attack and destroy anything that enters its domain. As a result of its temperament and its armament, just one Sharpedo can effectively tear apart an oil tanker. It evolves from Carvanha starting at level 30.

THE PAPER MODEL
Height: 18.0 cm/7.1 in
Width: 18.1 cm/ 7.1 in
Depth: 12.6 cm/5.0 in
No. of Pages: 3
No. of Pieces: 38
Level: Medium

NOTES: The easiest way to build it is by starting at the mouth and building the pieces up to the back flippers (aka "arms" on each sides). You'll want to glue the top and bottom fins as you build the body, then close the back and build each side flippers, closing them at the tips. You can also build the flippers and then glue them to the body but it will be a lot harder to close well.

The base is quite easy to build and you can add some weight in the base if you want. The model should rest with the "bottom" on the wave and the tip of the bottom fin at the base.

Download: A4 / Letter

ZORUA

Posted by K

Add Comments

ZORUA

570 / ZORUA - Pokémon Papercraft
Name: Zorua
Type:Dark
Species: Dark Fox Pokémon
Height: 0.7 m (2′04″)
Weight: 12.5 kg (27.5 lbs.)
Interesting Facts: Zorua debuted in the thirteenth Pokémon movie, Ruler of Illusions: Zoroark, where it was used by the antagonist, Grings Kōdai, to blackmail its mother Zoroark into attacking Crown City. It evolves into Zoroark starting at level 30.

THE PAPER MODEL
Height: 13.0 cm/5.1 in
Width: 9.2 cm/ 3.6 in
Depth: 15.6 cm/6.1 in
Pages: 3
Pieces: 66
Level: Medium

NOTES: Build from the head back. After building the first couple rings of the body, be sure to add the neck fur. If you wait too long it will be more difficult than need be. Close at the bottom of the rear legs, and glue on the tail afterward. If you are using lighter paper, you may want to glue on the tail before closing the legs, so that you can support it from the inside.

Download: A4 / Letter

SNEASEL

Posted by K

Add Comments

SNEASEL

215 / SNEASEL - Pokémon Papercraft
Name: Sneasel
Type: Dark / Ice
Species: Sharp Claw Pokémon
Height: 0.9 m (2′11″)
Weight: 28.0 kg (61.7 lbs.)
Interesting Facts: Sneasel are surely agile and will move with ninja-like movements in battle, as they are are cunning, and have developed many strategies to capture their prey. In addition to being formidable weapons, their claws are also useful tools and enable them to climb trees. It evolves into Weavile when leveled up at night while holding a Razor Claw.

THE PAPER MODEL
Height: 14.8 cm/5.8 in
Width: 12.9 cm/ 5.1 in
Depth: 11.9 cm/ 4.7 in
Pages: 2
Pieces: 38
Level: Medium

NOTES: Just build from head to feet, attaching arms when possible. Be sure to keep pressure on the tail parts when gluing until they are dry. Add a small weight between the legs to help it balance, as the tail sets it slightly off balance.

Download: A4 / Letter

WEAVILE

Posted by K

Add Comments

WEAVILE

461 / WEAVILE - Pokémon Papercraft
Name: Weavile
Type: Dark / Ice
Species: Sharp Claw Pokémon
Height: 1.1 m (3′07″)
Weight: 34.0 kg (75 lbs.)
Interesting Facts: Weavile's appearance looks like that of a bluish-black bipedal feline, clad in a bright red crown, and collar. Weavile has two tails, instead of three like its pre-evolved form. Unlike its pre-evolved form, there is no gem on its chest, and it has three claws on each paw, as opposed to just two.

THE PAPER MODEL
Height: 20.0 cm/7.9 in
Width: 15.0 cm/ 5.9 in
Depth: 18.6 cm/ 7.3 in
Pages: 4
Pieces: 64
Level: Medium/Hard

NOTES: Just build from head to feet, attaching arms when possible. Be sure to keep pressure on the tail parts when gluing until they are dry. Also, add a small weight below where the tail parts attach as the head makes it slightly off balance.

Download: A4 / Letter

SANDILE

Posted by K

Add Comments

SANDILE

551 / SANDILE - Pokémon Papercraft
Name: Sandile (Meguroko)
Type: Ground / Dark
Species: Desert Crocodile Pokémon
Height: 0.7 m (2′04″)
Weight: 15.2 kg (33.3 lbs.)
Interesting Facts: No other Pokémon as the same type combination as Meguroko and its evolutionary relatives. It evolves into Warubiru starting at level 29, which then evolves into Warubiaru starting at level 40.

THE PAPER MODEL
Height: 8.2 cm/ 3.2 in
Width: 7.9 cm/ 3.1 in
Depth: 21.5 cm/ 8.5 in
Pages: 3
Pieces: 47
Level: Medium

NOTES: Build from nose to tail, and be careful when placing the legs- be sure they are level.

Download: A4 / Letter

DARKRAI

Posted by K

Add Comments

DARKRAI

491 / DARKRAI - Pokémon Papercraft
Name: Darkrai
Type: Dark
Species: Pitch-Black Pokémon
Height: 1.5 m (4′11″)
Weight: 50.5 kg (111.3 lbs.)
Interesting Facts: Darkrai is notable for its ability to cause nightmares and trap people in them. It can become a shadow to move quickly, but it is still susceptible to damage in this state. It is also capable of human speech. It is not known to evolve into or from any other Pokémon.

THE PAPER MODEL
Height: 19.3 cm/7.6 in
Width: 18.9 cm/ 7.4 in
Depth: 17.1 cm/6.7 in
Pages: 4
Pieces: 62
Level: Medium
NOTES: Build Darkrai from top to bottom. Glue the head piece as soon as the red collar is ready. Take your time through the small parts. Attach the arms to the shoulders as soon as possible, then glue the arms to the body and continue your way down. Close it at the bottom.

Download: A4 / Letter

SPIRITOMB

Posted by K

Add Comments

SPIRITOMB

442 / SPIRITOMB - Pokémon Papercraft
Name: Spiritomb
Type: Ghost/Dark
Species: Forbidden Pokémon
Height: 1.0 m (3′03″)
Weight: 108.0 kg (238.1 lbs.)
Interesting Facts: Spiritomb are thought to be evil Pokémon. They tend to go on destructive rampages like Gyarados. It is said to act as a hive-mind, with all of the souls that comprise it acting in unison towards the same goal. It is not known to evolve into or from any other Pokémon.

THE PAPER MODEL
Height: 18.0 cm/ 7.1 in
Width: 18.6 cm/ 7.2 in
Depth: 12.9 cm/ 5.1 in
Pages: 5
Pieces: 31
Level: Hard

NOTES: Spiritomb is kinda hard to build but I tried to fix it as to be easier. It's made of 3 parts: the "rock", the "neck" and the "head". Each parts has a different colors of letters in the template.

The rock is easy to do, just start by the top, glue the middle pieces to fit the "purple inlays" and close at the bottom. Don't forget to add some weight in the rock to help it stand (some penny or 5 cents usually work.)
The neck is a bit harder, but start with the bottom part and close with the circle piece on top.
The head is made of 2 parts, front and back. Start by building the front and the back pieces separately. Then add the small rhombus pieces on the front piece where the spikes are (follow the letters). Then glue the white piece inside the middle of the front piece and then glue the back piece on.

When all three parts are made, glue the neck at the back of the head and then glue the neck on the rock, using something to stabilize the model while it dries

Download: A4 / Letter

HOUNDOOM

Posted by K

Add Comments

HOUNDOOM

229 / HOUNDOOM - Pokémon Papercraft
Name: Houndoom
Type: Dark / Fire
Species: Dark Pokémon
Height: 1.4 m (4′07″)
Weight: 35.0 kg (77.2 lbs.)
Interesting Facts: Houndoom's abilities are the same as Houndour's, only stronger. As a matter of fact, legends claim that anyone that gets burned by Houndoom's Fire attacks will never be healed and that Houndoom's howling was once claimed to be the call of the Grim Reaper. Houndoom are generally very protective, alert, headstrong, intelligent, and very focused. They can be overly aggressive, but only to protect themselves, their young, their territory, or their owner. However, when properly trained, they can be extremely loyal, loving, and caring Pokémon, as well as very good pets. It evolves from Houndour starting at level 24.

THE PAPER MODEL
Height: 17.0 cm/6.7 in
Width: 15.0 cm/ 5.9 in
Depth: 42.0 cm/16.1 in
Pages: 7
Pieces: 75
Level: Medium/Hard

NOTES: This model is probably one of the few models that would benefit being built as the lined version, particularly with regards to the horns, teeth, claws, feet, legs, and tail ... well, that's most of it so you may as well do the rest! The teeth need to be folded inside out, otherwise you'll end up with purple teeth, and I don't think that's correct, is it?

A really important tip for this model is to not attach the feet until the very last moment - that way you can ensure that they are flat and the model will stand up. Apart from the above, follow the numbers on the template, re: order of build, and close at the bottom of the legs and the sole of the feet.

Download: A4 / Letter

MIGHTYENA

Posted by K

Add Comments

MIGHTYENA

262 / MIGHTYENA - Pokémon Papercraft
Name: Mightyena
Type: Dark
Species: Bite Pokémon
Height: 1.0 m (3′03″)
Weight: 37.0 kg (81.6 lbs.)
Interesting Facts: Mightyena is based on a hyena. Its body is a mixture of black and gray colored fur, with black coloration on its lower legs, clawed feet, and tail. Mightyena has dark, triangular streak patterns below its eyes, which have yellow scleras and red irises. Mightyena has rhombus-shaped ears with dark insides, gray paw pads, and noses that are depicted as either red or black in coloration. It has eyebrow-like extensions on its head from the black, shaggy "mantle" of fur on its back.

THE PAPER MODEL
Height: 20.0 cm / 7.9 in
Width: 10.0 cm / 3.9 in
Depth: 21.3 cm / 8.4 in
Pages: 6
Pieces: 64
Level: Hard

NOTES: This model can be a little annoying just because of the small teeth and all of the hair. Follow the numbers as indicated, working from nose back, ending with the bottom of the hind feet. PDO is always useful, especially with this. Notes included in packs.

Download: A4 / Letter

POOCHYENA

Posted by K

Add Comments

POOCHYENA

261 / POOCHYENA - Pokémon Papercraft
Name: Poochyena
Type: Dark
Species: Bite Pokémon
Height: 0.5 m (1′08″)
Weight: 13.6 kg (30.0 lbs.)
Interesting Facts: At first sight, Poochyena bites at anything that moves. Noted for its tenacious nature, this Pokémon chases after prey until the victim becomes exhausted. However, Poochyena may turn tail if the prey strikes back. Poochyena often try to intimidate their foes by making the hair on their tails bristle out. It evolves into Mightyena starting at level 18.

THE PAPER MODEL
Height: 16.3 cm/ 6.4 in
Width: 9.6 cm/ 3.7 in
Depth: 23.0 cm/ 9.1 in
Pages: 7
Pieces: 47
Level: Medium

NOTES: Poochyena is kind of easy, but the spikes make it a lil harder. I would recommend to start by the spikes since they will be easier to glue together. I tried to make the template in a way that the spikes will be easy to build, but you should really use the PDO to see how it is done.

For the rest of the body, it's pretty simple. Build the tail and glue the spikes on it, then build the head and neck. When both sides are done, join them together with the 2 middle pieces. You should then have the whole body built with 4 holes for the legs. Now just build the legs from the hips to the feet and close with the bottom of the feet.

Download: A4 / Letter

MURKROW

Posted by K

Add Comments

MURKROW

198 / MURKROW - Pokémon Papercraft

Name: Murkrow
Type: Dark/Flying
Species: Darkness Pokémon
Height: 0,5 m (1′08″)
Weight: 2.1 kg (4.6 lbs.)
Interesting Facts: Murkrow is a small bird Pokémon with black feathers. Murkrow's shaggy, feathery tail bears the resemblance of the end of a broom, especially with the small, short, red-colored rod-like beginning segment of it. Murkrow has a crooked, yellow beak that resembles a witch's nose, a feather-crest that resembles a witch's hat and semi-circular eyes with red pupils. Murkrow’s neck seems thin in comparision to the size of the head it supports, with an extension of feathers on its neck like a collar. Murkrow has four toes on its yellow feet, three forward and one backward.

THE PAPER MODEL
Height: 18.0 cm/ 7.1 in
Width: 31.5 cm/ 12.4 in (includes second set of wings)
Depth: 18.2 cm/ 7.2 in
Pages: 3 (1 additional for optional 2D wings)
Pieces: 60
Level: Medium/Hard

NOTES: Follow the numbers while building, and refer to the included Edge ID pdf if needed to be sure of how tabs line up. Definitely refer to the pdo if possible, as the spikes of the tail get a bit confusing. Close at piece 48 (the chest). If you choose, you can opt for the simpler 2D wings included on the last page. Instead of making parts 20-37, make 57-60 and attach them in their place. Parts 57 and 59 will go in between the layers of 58 and 60, near the base of the wing, in order to create a '3D' surface to attach to the body.

Download: A4 / Letter

HONCHKROW

Posted by K

Add Comments

HONCHKROW

430 / HONCHKROW - Pokémon Papercraft

Name: Honchkrow
Type: Dark/Flying
Species: Big Boss Pokémon
Height: 0.9 m (2′11″)
Weight: 27.3 kg (60.2 lbs.)
Interesting Facts: Honchkrow is roughly twice the size of its pre-evolution, Murkrow. Its feathers are mainly dark blue, while the underside of its wings is partially red. The tail's base is a white, cylindrical stalk, on which there is a growth of red feathers on the end. Honchkrow has a white and prominent crest of feathers on its chest that bears resemblance to a beard or cravat. Honchkrow has black feet with four toes, arranged in similar fashion as Murkrow's. Its head is supported by a broad and short neck. It has a slightly curved, yellow beak. The circular eyes have a white cornea and the pupils are red. It has dark blue eyelids. A large feather crest on its head makes it appear to be wearing a fedora hat that has spikes extending from the back. Its specific coat of feathers make it bear vague resemblance to a man dressed in a formal suit and a hat.

THE PAPER MODEL
Height: 21.0 cm/ 8.3 in
Width: 24.4 cm/ 9.6 in
Depth: 29.8 cm/ 11.7 in
Pages: 10 (3 additional pages for optional wings)
Pieces: 84
Level: Hard

NOTES: Follow the numbers while building, and refer to the included Edge ID pdf if needed to be sure of how tabs line up. Definitely refer to the pdo if possible, as the spikes of the tail get a bit confusing. Close at the rear, adding the closed wing before completely closing the body. Attach the tail to the small 'feathers' on the rear. Last three pages include optional wings if you would like to modify the appearance by switching out wings. The wings included in the template on pages 7-9 are those featured in the picture. Choose one left wing and one right wing if you plan on switching around wings, regardless of which you choose.
Wings are labelled. Also, when building it with one open wing, a considerable amount of weight must be added to the rear of the body (near the tail, but not in the tail) in order to counter balance it. Additional instructions included.

Download: A4 / Letter

HYDREIGON

Posted by K

Add Comments

HYDREIGON

635 / HYDREIGON - Pokémon Papercraft

Name: Hydreigon
Type: Dark/Dragon
Species: Brutal Pokémon
Height: 1.8 m (5′11″)
Weight: 160.0 kg (352.7 lbs.)
Interesting Facts: Hydreigon are really violent Pokémon, attacking anything it sees. On the tip of its arms there are dark blue heads, which gives it three heads, all of which are adorned by a fuchsia collar. It has six wings, pointy legs, and a spiked tail. It’s a pseudo-legendary, but unlike other pseudo legends, it has Special Attack as its higher stat, instead of the others that have Attack. It’s also the Pokémon that takes the most time to evolve, doing so at level 64. It can learn attacks of all types except grass.

THE PAPER MODEL
Height: 19.0 cm/ 7.4 in
Width: 26.6 cm/ 10.2 in
Depth: 28.0 cm/ 11.0 in
Pages: 7
Pieces: 107
Level: Medium/Hard

NOTES: Following the numbers on this model is really important. Start by the head to the middle of the body attaching the wings as soon as possible. Build also from the tip of the tail t the middle attaching the legs as soon as possible. Before closing add weight in it, making it stay on the tail. Close at the indicated piece. More instructions are added in the download pack.

Download: A4 / Letter

PURRLOIN

Posted by K

Add Comments

PURRLOIN

509 / PURRLOIN - Pokémon Papercraft

Name: Purrloin
Type: Dark
Species: Devious Pokémon
Height: 0.4 m (1′04″)
Weight: 10.1 kg (22.3 lbs.)
Interesting Facts: Purrloin is a primarily purple-colored, feline Pokémon. Its head is large proportional to its body, and tufted at its ears and cheeks. Long, tapered violet markings above its green, feline eyes extend towards its ears. Tapered whitish markings above its eyes resemble eyebrows, and its muzzle, sporting a diminutive nose, is of similar coloration. Its neck, shoulders, back and hind paws are also whitish-colored. The lower portion of its forelimbs are purple, and the tip of its tail sports a curved, vaguely scythe-like extension.

THE PAPER MODEL
Height: 17.5 cm/ 6.9 in
Width: 10.7 cm/ 4.2 in
Depth: 7.5 cm/ 3.0 in
Pages: 2
Pieces: 40
Level: Medium

NOTES: Build the ears first and arms separately. Then attach the ears building the head downward. Attach the tail when possible. Close the model at one of the legs.

Download: A4 / Letter

UMBREON CHIBI

Posted by K

Add Comments

UMBREON CHIBI

197 / UMBREON CHIBI - Pokémon Papercraft
Name: Umbreon
Type: Dark
Species: Moonlight Pokémon
Height: 1.0 m (3' 3")
Weight: 27.0 kg (59.5 lbs)
Interesting Facts: When agitated, this Pokémon protects itself by spraying poisonous sweat from its pores. Also, on the night of a full moon, or when it gets excited, the ring patterns on its body glow yellow. It evolves from Eevee by Happiness during the night or when around a Moon Shard.

THE PAPER MODEL
Height: 7.5 cm/3 in
Width: 5.9 cm/2.3 in
Depth: 7.3 cm/2.9 in
No. of Pages: 1
No. of Pieces: 13
Level: Easy

NOTES: Start with the head and close it at the bottom. Build the legs and then go upwards, till you close the body at the "neck". Glue the head onto the body, then glue the ears and tail. Follow the numbers on the template.

Download: A4 / Letter

ZOROARK

Posted by K

Add Comments

ZOROARK

571 / ZOROARK - Pokémon Papercraft

Name: Zoroark
Type: Dark
Species: Illusion Fox Pokémon
Height: 1.6 m (5′03″)
Weight: 81.1 kg (178.8 lbs.)
Interesting Facts: Zoroark is a bipedal fox-like Pokémon, and mainly grayish-brown in coloration with crimson and black accents. It has a pointed snout and ears, the insides of which have red coloration. Zoroark also has some red rimming its eyes and mouth. Zoroark has a large, voluminous mane, primarily red in coloration but with black tips. The mane also somewhat resembles a ponytail, as a teal bangle down its length separates a mass of the mane from the lower portion.

THE PAPER MODEL
Height: 17.0 cm/ 6.7 in
Width: 26.3 cm/ 10.4 in
Depth: 18.5 cm/ 7.3 in
Pages: 5
Pieces: 101
Level: Hard

NOTES: Build from head down, attaching teeth, arms, and legs as you go. Be careful with the teeth, they're tiny. Further instructions are included.

Download: A4 / Letter

CACTURNE

Posted by K

Add Comments

CACTURNE

332 / CACTURNE - Pokémon Papercraft
Name: Cacturne
Type: Grass/Dark
Species: Scarecrow Pokémon
Height: 1.3 m (4′03″)
Weight: 77.4 kg (170.6 lbs.)
Interesting Facts: Cacturne has numerous poisonous abilities. In addition, Cacturne's body retains moisture throughout the hot daylight hours. After spending thousands of years in harsh deserts, its blood transformed into the same substances as sand.

THE PAPER MODEL
Height: 20.5 cm/ 8.1 in
Width: 17.6 cm/ 6.9 in
Depth: 10.0 cm/ 3.9 in
Pages: 4
Pieces: 45
Level: Medium

NOTES: Build the model starting from the hat. Be carefull when closing it, it's the only tricky part.
Glue it to the face right after the 1st segment of the face is built. Work your way down, attaching the spikes as you go. Close at the legs.

Download: A4 / Letter

SABLEYE

Posted by K

Add Comments

SABLEYE

302 / Sableye - Pokémon Papercraft
Name: Sableye
Type: Dark/Ghost
Species: Darkness Pokémon
Height: 0.5 m (1'08")
Weight: 11.0 kg (24.3 lbs)
Interesting Facts: Sableye are very diminutive hominid-like creatures with dark purple bodies. Their bodies are adapted for cave life as they are flexible enough to fit into small crevices while being tough enough to survive cave-ins. Their most distinguishing features are their gemstone-like eyes, which allow them to see in very little light. They have gemstones on their chests which grow as a result of its crystal and mineral diet. They are able to feed on such hard foods because of their sharp razor teeth, which are designed to crunch up rocks.

THE PAPER MODEL
Height: 16.0 cm/ 6.3 in
Width: 10.3 cm/ 4.1 in
Depth: 11.0 cm/ 4.3 in
No. of Pages: 3
Level: Medium/Hard

NOTES: Start at the top of the head, close at the bottom. Attach the gems when building the back. Refer to part numbers for any additional help. Alternate 'diamond' eyes and open mouth textures are included in pack for use with PDO. Build picture shown with alternate textures.

Download: A4 / Letter

Popular posts

About

Archive for Oktober 2013

UMBREON

TYRANITAR

HOUNDOUR

ABSOL

CRAWDAUNT

SHARPEDO

ZORUA

SNEASEL

WEAVILE

SANDILE

DARKRAI

SPIRITOMB

HOUNDOOM

MIGHTYENA

POOCHYENA

MURKROW

HONCHKROW

HYDREIGON

PURRLOIN

UMBREON CHIBI

ZOROARK

CACTURNE

SABLEYE

Blogger templates

Blogger news

Blogroll

Blog Archive

Mengenai Saya